slim chair

by pachek, published

slim chair by pachek Jul 4, 2014




Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

3771Views 1193Downloads


here available for ordering manufacturing nearby your location through Opendesk: https://www.opendesk.cc/regaliz/slim-chair

Slim chair have been engineered to take the most from the plywood structural properties combining a high bending resistance with very low weight.

To be made from standard 18 mm thick plywood, the slim chair is very easy to fabricate, with a very simple assembly process. Once mounted the result is very robust and, even thought it feels like a light structure, can withstands heavy loads thanks to the plywood strength properties.

While assembling the parts it is recommended to drill pre-holes, at the edges of the plywood, of a lower diameter than the fastening bolts to be used. That is to prevent the separation of the plywood layers while bolting.

The DXF nesting file contains 6 mm diameter holes where the bolts are located. Those features on the cutting file are intended not to be cut trough, but just to be engraved a couple of mm to both indicate bolts positions for the assembly and house the bolts heads once inserted. 3 slim chairs can be obtained form an standard plywood board.



All Apps

Upgrade this Thing with Thingiverse Apps

No results.

is the dxf in mm or cm? The scaling doesn't look right in inskcape. I'm doing inkscape -> SVG -> Makercam.

DXF is in milimeters and Scale 1:1