Printrbot Brand Spool Spacer for Printrbot Simple Metal Spool Holder UPDATED
by tonyyoungblood, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a spacer to center Printrbot brand spools of plastic for my Simple Metal Spool Holder available here: http://www.thingiverse.com/thing:322923
Fits these roles of plastic: http://amzn.to/1lrdfB0
It should also fit any spools with an inside diameter of around 51.75mm.
UPDATED 2014-08-04. I increased the diameter slighter and raised the edges for a VERY snug fit. So snug it may require sanding or pliers to get on. But once on, it WILL NOT FALL OFF!
I also made spacers for BuMat and SainSmart brands of plastic. If you want a customized spacer for your favorite brand, send me the inside diameter of your spool.
Bumat spacer: http://www.thingiverse.com/thing:381557
SainSmart spacer: http://www.thingiverse.com/thing:381558
Also check out my Simple Metal base: http://www.thingiverse.com/thing:366324
Print out two spacers and put one on each side of the spool. This is a VERY snug fit. It may require light sanding or pliers to initially apply.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Printrbot Brand Spool Spacer for Printrbot Simple Metal Spool Holder UPDATED by tonyyoungblood is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tonyyoungblood a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tonyyoungblood would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).