The picture is taken of the Dutch Lion flag.
Use these coaster to place your favourite drink. If you have printed it, don't hesitate to show of your skills and upload a picture.
This is a standard size coaster (100 by 100 by 5 mm), to fit in my coasterholder:
Raimon of IdeaLab
I have printed this model with Ultimaker white PLA. I used 0.2mm layer height and, 18% infill. I used a 0.4mm nozzle with my extruder at 210 degrees Celcius. I used a heated bed. To avoid the curling up at the bottom i used a brim. Don't hesitate to use your own configuration....no worries!
I have chose images from google (oranje leeuw logo) and made it a 3D object. And combined it with a coaster.
If you would like to know how i design a 2D picture (google) into a 3D model.
Use this link:
https://www.youtube.com/watch?v=g6cmClwLhz8 (video is under 6 min.)
» the Netfabb Online Service is an easy-to-use solution for anyone with
access to an internet connection and a web browser to repair 3D model files. «