Baby Raptor - 3" racing drone
micro fpv cam (19mmx19mm)
14xx motor screw holes (meaning 12mm dia)
Parts you will need to have cut out of carbon fiber:
(1) 2mm Bottom plate
(1) 2mm Mid-Plate
(4) 3mm 3in_Sngl_Arms or (2) 3mm ArmPair
(1) 3mm Chewbone (it's a brace that will help with impacts)
Parts you need to print:
3" Raptor Pod
Hardware you need:
(1) 20mm M3 aluminum standoff
(6) pressnuts that will fit a M3 screw
(6) M3x8mm screws
(2) M3x10mm screws
If you use the Chewbone brace you will need (4) M2x8mm screws per brace to mount your motors.
Ok. Have fun. I know you didn't read any of this.
Let me know if you actually decide to make one. Hundreds of people have downloaded my other frames and I have no idea if any exist other than the 20 or so that my friends fly.