This is a drone from Rainbow Six Siege.
Good luck printing it
Print "body 1" with support.
everything else can be printed without.
print "shaft" 2 times
The two big ends of the "shaft" parts need to be connected to the wheels (use glue if necessary).
The Parts "body 1" and "body 2" need to be glued together to make a symmetric model.
The "tail" needs to be glued to the back of the assembled body of the drone.
Glue needs to be applied to the loose ends of the shafts.
The wheels can now be inserted in the holes of the body.
Let the glue dry and check that the shaft isnt getting glued to the body.