This is the Complete Set for the Anet A8 Plus Y-Rods.
Just as the Stock Version with the mount for the Y-Axis EndStop Switch.
The original ones are printed too, but in a lesser Quality.
Also the Dimensions are now more exact.
I printed with 70% Infill because of stability reasons, when you really want to tighten the screws.
Printed with 200°C and 60°C Bed Temperature
3DJake EcoPLA PLA
I had to add Horizontal Expansion in Cura, so the Holes would come out right.
My Value was -0.15mm.
If you got your Printer properly calibrated, you probably won't need it.