This is Ana's Sleep Dart Gun from Overwatch!
Overwatch is one of my favorite games, and Ana is one of my favorite heroes!
It took some time to design this but I think I got what I wanted out of it!
Flash Forge Inventor Duel Extruder
Idk Found it on amazon PLA
For me it took a lot of trial and error with my positioning on the print bed to get the pieces to come out right. Smooth finish on the outside and supports on the inside. I would consider making a few files before printing to see what positions you can find to make it work.
For the BARREL TIP!
DO NOT: Print it upright with the flat base as the bottom of the print.
WHY?: There is a weird overhang that is very hard for the printer to support and the piece will either fail or come out horribly warped!
BEST POSITION: You can try your own thing, but for me the best position was the way it is positioned when on the gun. (Bottom two arms on the printing bed, and middle arm above)
This is the piece all put together! This is after sanding, priming, sanding again, and ive begun to fill in the low spots with body filler.
This is all the pieces separated in case you are unsure of how everything got put together. *** DO NOT PRINT THE BARREL TIP IN THE POSITION SHOWN IN THIS PHOTO ***
Heres What I Did!
I basically took screen shots of the Sleep Dart Gun in the Overwatch Skin viewer (in game).
A front view and a side view and built my pieces from there, getting an approximate design of the gun.
This isnt a 100% accurate version of the gun itself, but im very happy with how it came out, and think it looks pretty good.