Anki Cozmo Head Side Trim Replacement Piece
This is designed to replace the trim piece on the side of Anki Cozmo's head. This was intentionally designed flat on the outer part rather than rounded like the original to allow for placement of vinyl decals.
This was printed with a Resin DLP Printer but could possibly be printed FDM, however strength could be an issue.
I originally printed the similar piece from https://www.thingiverse.com/Dao20, which is a great model, but the tabs are a little too large, so I just decided to create a new model.
ᕦ( ͡° ͜ʖ ͡°)ᕤ
They Like me, they really really like me.. don't they???
If you like my designs, PLEASE hit that like button and let me know.
If you print my design, post a make! I love seeing how other makers prints come out and how they use them.
If you get some good use out of my design, consider a tip to encourage me to do more!
¯( ͡° ͜ʖ ͡°)/¯
Please Keep comments relative to the design or print, but feel free to leave a comment or question.
Printed at 30 degree angle with 5mm lift. Heavy supports along base and medium supports for the tabs.