This is the alternative design mount designed to fit the Gilbert Engineering Mother of All Wreaths that keeps the center of the wreath open. 1/2" PVC slides between the openings in each mount to create a support structure behind the coro. At the back of each mount a screw is used to secure the PVC. Ideally attach mounts prior to inserting pixels otherwise affected pixels will have to be removed to install mounts.
Link to version 1 alternate mount of the MOAW.
Note: While the MOAW looks symmetrical, there are small variations of several millimeters between hole locations. As a result the fit of these parts will vary slightly depending on placement. Pixel holes are oversized to account for this variability. These mounts fit as illustrated in the pictures with opposing corners shown in matching colors. The PVC is depicted in yellow for illustration purposes.
3 perimeter walls, 4 solid top / bottom layers.