This is my first "big" self designed print. I've only made a couple tiny things before. I've learned a lot about Fusion 360. I started originally making splines that followed the coast, but it was a lot of work, and I made a few mistakes along the way, followed by one at one at the end, so I ended up scrapping the whole thing and going with this simpler design for now, for my own sanity's sake haha. I'll put up the STL and cad files as soon as I figure out how, in case anyone is interested.
The "spilikin" compartment is a little small for the 15 pegs you'd need for a full game with scoring. It was big enough originally, but through some unfortunate events it got scaled down and I was too lazy to fix it. I may fix it in a revision.
The spilikin door was just a tad too long for the latch to work properly, so I trimmed 0.8mm off the length with scissors and now its just about right. I reduced the size in the cad file and stl by 0.8mm as well but I haven't tested this yet by printing it. So your mileage may vary.
50? But it should be lower, it's extremely sturdy