MaxSonar Servo Mount
by SKG, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Simple mount for attaching a MaxBotix MaxSonar sonar unit to a servo (or really anything else).
I mount this on a standard servo arm, or you can mount it on a flat surface. It has two screw holes that are intentionally a bit small so you can drill them out for a clean hole fitting an M3 or #4 screw.
I have included the OpenSCAD file so you can tweak it as needed, move the screw holes, etc.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
MaxSonar Servo Mount by SKG is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving SKG a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SKG would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).