Attention - not compatible with parts of the V1 version of the Clever DiceBox !
For tabletop gamers it's important to carry all those small things as dices and more ... so I worked on a system for dices, figures and utilities.
This box is designed for using (at least) two colours. You might print everything in one colour, but you loose the elegance of this design.
The counterbox loads up to 18 dices and two (small) coins as 2-sided dices ("decision support").
It also includes 3 counters for available spell levels, actual hitpoints and a counter e.g. for rounds or other issues.
It allows you to stack further elements as the figure and the utility box and can contain 8 simple wall limiter for your dungeon map. With the paper pocket you can descripe the content of the box if you use more than one or can't differ between all the boxes of this box system ...
Use a little glue for fixing paper pockets (for marking the content) and for the closers. You might instead or additionally use small magnets (5x1 mm fits best) - both is working alone or in combination (as I use it).
Note: the counterbox layers shouldn't be fixed to the chassis to keep it rotatable for left hand gamers or if you need to turn it to an optimal position during gaming. Fix only the two layer parts.
It should be printable on each 3D printer ... some elements are more complicated for this purpose than might necessary if you have a dual extruder printer (but that might be not the usual case for most users here ...)
Please look also to the Genious boxes with much more functionalities ...
If you find any error or weaknesses in this files please let me know ... also if you have difficulties in assembling the parts.
Special thanks to 614creations, who has worked out a dragon silhouette which I had used for the covers ... thanks also to all the other makers which had published some models I used for filling some of the pockets.