#3DTakoTuesday : Halloween Pumpkin Candy Bowl

by leonardlee Sep 28, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

You will need to print the bottom part and the lips part from the original #3DTakoTuesday octopus.

That is, 3dtakotuesday.lips.mm.stl and 3dtakotuesday.bottom.mm.stl from https://www.thingiverse.com/thing:3850425/files

#3DTakoTuesday : The Mood Octopus

Recommended Cura support settings for the body?

I recommend no supports actually. Instead, use bridge to span the gap when it gets to the flat part. I think in Cura you have to explicitly turn on an experimental setting to do bridges ("Enable Bridge Settings"?). Please see the print settings section for more info why I prefer the bridge instead of support for this print.

If you would rather use support, just do the default generated support but from the build plate only.