CNC 3018 Pro Circuit Board Enclosure
Protective box with cooling fan mounting for Cronos and similar CNC/Laser electronics board which have mounting holes 90mm x 76.5mm spacing.
Note: if your electronics board is narrower, with 75mm x 76.5mm mounting hole spacing then there is a box which might fit with thing:3291676.
I will be releasing a set of cable clips and ducts to go with this board shortly, when I have finished testing them.
If you have already assembled you 3018 then I suggest tacking the circuit board fixing nuts in place with impact adhesive so that they do not move when you fit this enclosure.
I include files for lids with alternative mountings for cooling fans. It is important to use a fan so that the electronics will last longer. The box has extra space on the right-hand side so that you can coil surplus cabling. You should use a cable tie to keep it together so that it is kept clear of the fan.
My CNC 3018 Pro Things
I design these things for myself but I have published them for you. If they make your life easier or save you money then please do not forget to "Tip Designer"!
0.20 or 0.25 layer height
Any Any filament. I used ABS