Thingiverse is currently experiencing issues related to search. We are currently investigating. Thanks for your patience.

Loading
DansMakerShop

PwnCNC Dust Boot v1

by DansMakerShop Oct 7, 2019
Download All Files

Thing Apps Enabled

Please Login to Comment

Another question. What is the maximum thickness of material I can have with this boot? from your photos, it looks as if it may be limiting.

Thanks

whatever the maximum your machine can handle. The boot wraps around the router, therefore the boot can plunge as deep as needed into your stock material. While maximizing Z was not a priority with this boot design, my upcoming HDZ boot design definitely does and retains 65mm of Z travel above stock wasteboard.

Thanks for sharing this design!

I was about to start printing this and noticed that the support density setting of 3% for the dust boot wouldn't provide a proper amount of support(after looking at the preview before printing). Just want to ask if I'm missing something.

Thanks again!

I agree, it does seem a bit odd... but on my Anycubic i3's... the print comes out perfectly and only takes <10min to get cleaned up.

Thanks for the quick reply! I'll give it a shot and go from there.

Cheers