After a few failed updates from Cura and general instability, i made the move to Prusa Slicer 2.1.
I tweaked the profile with a few test prints, and i find the results better than Cura.
It should be a good starting point for anyone trying to move to Prusa Slicer.
Profile for PLA. Can be used for TPU with 40mm/s speeds.
For PETG, temperature needs to be changed to 240 and cooling fan to 0.
Moai STL uploaded to be able to post the config
Link to article: https://3dprintbeginner.com/cr10s-pro-prusa-slicer-profile/