Heated Bed Part Scraper
by Crispy001, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This extruded scraper will help remove parts and debris from your printing surface. Works for scraping and prying! Measures approximately 2.5" long by 1 inch wide by .25" thick.
In my opinion, this scraper is one of the most useful designs I've published!
Volume: .76 cubic inches
ABS Weight: .03 pounds
- Print the part using the provided .STL file. All dimensions are in mm.
- Lightly sand edges if necessary to flatten the bottom of the scraper.
A low infill ratio is recommended to conserve plastic.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Heated Bed Part Scraper by Crispy001 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Crispy001 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Crispy001 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).