Fully customizble ceilling mounting electrical box for Coiaca boards.
Make any light smart!
This box was designed to be placed between the ceilling (or wall) and the lighting artifact, to convert any light into a smart light, adding a Coiaca PSWSx smart switch board.
But, removing the Coiaca board support you can use it for whatever you need, placing it between a regular electric box (usually octogonal) and any lighting artifact.
Provided STLs are for a square box
130mm width and
30mm height with and without Coiaca board support and also for Sonoff Basic.
Note: Even though it's not so hard to make, I bought the cable gland that can be seen at the bottom of the box. So, it's not part of the model.
Printalot PLA or PET
with the color of your choice. White is best for most ceilings and soffits and black seems to be nice for hanging wired artifacts, but you can choose any.
Even though PLA is fine, PET is more resistant and ease the mounting since it´s more elastic.
The provided measurements suits well for a regular lighting artifact. If you plan to use the box to hang a heavy one, you should consider increasing walls thickness.