Bottle Opener Key
by kaltalen, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
For quite a while i was carrying around a 3D printed bottle opener on my keyring (http://www.thingiverse.com/thing:9500) which was rather bulky especially when considering i only had one key on it!
I remeber finding this http://www.thingiverse.com/thing:11753 and liking how the Author wrote:
"The conventional key ring is not very conducive to pockets. The plane of your keys is perpendicular to the plane of the ring, forming a shape that cannot lay flat. There is always some edge poking into your leg."
That caused me to redesign my keys and this is the result.
Note: this is designed for a Australian 5c piece so it may not work with other coins
Print both halves, add coin and key!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bottle Opener Key by kaltalen is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving kaltalen a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure kaltalen would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).