My work desk is a mess and there are a handful of tools I wanted to have at the ready near my 3d printer at all times (and so I can find them when needed). So I created this modular tool caddy that mounts onto the top of either the left or right side (or both sides) of the JGaurora A3S. This does not fit the A5S but I will work on another posting for the A5S.
The base snaps firmly onto either top corner of the frame and then you can add and rearrange different tool holders onto the base. This allows customization of the tool configuration without reprinting the entire tool caddy. The base will fit on either the left or right side so you can print two and have them on both sides if you want. Although the right side back has less free space due to the filament feed and wiring.
I designed it for the tools I have which are probably pretty similar to the tools you all have handy but if anyone wants another tool holder I will be happy to create a new holder for you. I welcome ideas and suggestions. I am happy to create a library of different tool configurations.
I put a little mini cup/tray in the top centre that is only there because it was free space. I plan to use that to hold little things like nozzles or screws whenever I am dissembling/servicing the printer.
I am including files for the entire set that will print all in one go and also the individual files if you need to reprint anything or want to print individually. I am also including a blank tool holder that, if you print with 100% infill, you could cut or drill to suit any special needs without having to create a new cad file.
If you want to create your own tool holders see the included dimensions of the mounting tabs.