A standard wall-attachable mount for hanging 2 console controllers. It can be attached to the wall either via 1/16" holes for pushpins or with an adhesive such as Command strips. Designed to be printable on a 7x7" build plate with no supports.
-Xbox One (S)
-Switch Pro Controller
Printed on PEI surface adhesion sheet. High infill is required due to thin load-bearing features, but will also work with a thick shell (>1.2mm).
Designed in Solidworks using a 2d sketch for the profile, then extruded into a 3d model. Radiuses were added with fillet tool, and mounting holes with a constraining sketch and hole wizard.