Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
ZeboSun_AiFrame

daybreak'sbell rifle

by ZeboSun_AiFrame Jul 12, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

hi zebo sun
nice job!!!
could you please give me the name of the valve ore where i can order it. your link is dead

列个PCP套件呗

我20x20的打印机能打么?麻烦把你们的打印参数也报一下吧

could you please list the non printed parts so that others may build this? thanks :D

Hi Dat, you might need a Φ 35 mm Aluminum tube about 50 mm long 3.5mm thick, and a Φ 8 mm Aluminum tube about 60 mm long 1 mm thick with a Φ 6 mm hold on one side, and another Φ 12 mm Aluminum tube about 50 mm long 2 mm thick, and a Isomething like this:http://gaitaobao1.alicdn.com/tfscom/i4/TB1ze0.JFXXXXX_XFXXXXXXXXXX_!!0-item_pic.jpg_310x310.jpg

may i ask what you are wearing on your arms?

Hi Copperbot10, it is a motion capture controller use to control our robots, here is a video, wish you like it.
http://www.bilibili.com/video/av2813715/

This is simply awesome.

I'm assuming it works with airsoft balls, but I don't quite get the function of the pump on the back, and the lower cylinder at the front.

If you could post or comment a little more details about how this works, or how to figure it out, I'm definitely going to print this out. It looks awesome.

Hi elgambitero, you might need a Φ 35 mm Aluminum tube about 50 mm long 5mm thick, and a Φ 8 mm Aluminum tube about 60 mm long 1 mm thick with a Φ 6 mm hold depends on the balls, and another Φ 12 mm Aluminum tube about 50 mm long 2 mm thick, and a Integrated valve like this:https://item.taobao.com/item.htm?spm=a230r.1.14.168.U3a57B&id=520152980545&ns=1&abbucket=7#detail
for more, please check
https://grabcad.com/library/daybreak-s-bell-rifle-1

Wow nice job do you think it possible too adapt for a bolt ?

is very interesting but it is incomplete.
where the mechanical parts are not printable?
where we procure?

Thank you topyx84, this is still a work in progress, I would release more details about how to make a working one if you need it.
Actually this is a bb gun toy, you could get most of the unprintable parts in some hardware stores.