Rezepte-Box (Recipe box) for A6 cards
by capitaenz, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This box can be stick into the kitchen cabinet.
It can be kept Din-A6 Laminated recipe cards.
Sorry, only with German lettering.
Use double-sided tape to attach.
I printed the box in >2 hours with these settings:
I use Slic3r 0.9.7 an a PG35L Extruder with Printhead from grrf.de (0.45mm).
bottom_solid_layers = 4
bridge_flow_ratio = 0.90
bridge_speed = 80
brim_width = 0
complete_objects = 0
external_perimeter_speed = 70%
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 30
fill_density = 0.20
fill_pattern = rectilinear
first_layer_extrusion_width = 0
first_layer_height = 0.36
first_layer_speed = 40%
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_speed = 70
layer_height = 0.36
min_skirt_length = 0
only_retract_when_crossing_perimeters = 1
output_filename_format = [input_filename_base].gcode
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 2
randomize_start = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 150
solid_infill_every_layers = 0
solid_infill_speed = 60
support_material_angle = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 40
support_material_threshold = 50
threads = 4
top_solid_infill_speed = 70%
top_solid_layers = 4
travel_speed = 300
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Rezepte-Box (Recipe box) for A6 cards by capitaenz is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving capitaenz a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure capitaenz would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).