Thinner Solidoodle fan duct
by rincewind, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a derivative of the excellent fan duct for Solidoodle by Ian Johnson & Lawsy (http://www.soliforum.com/topic/182/nozzle-fan-duct/ and http://www.thingiverse.com/thing:30828)
It stays a bit higher up from the printing bed and has a notch to accommodate the longer screw in the back of the extruder
Print together with the mount from http://www.thingiverse.com/thing:30828 and follow the same instructions.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Thinner Solidoodle fan duct by rincewind is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving rincewind a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rincewind would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).