This is a customizable and easy to print case for the Odroid-H2 single board computer.
The case can be configured to contain a 2.5" disk drive (with a height between 7 mm up to 15 mm). If you do not want to use a 2.5" disk at all, it can be disabled to reduce the case height. The Ordoid-H2 is attached with M3x30 screws and nuts. Screw sizes are configurable as well.
The case dimensions are 13x12x6.5 cm for the configuration with a 9.5 mm 2.5" disk.
For this configuration STL files are included. For all other configurations you can use the OpenSCAD Customizer.
Geeetech Prusa i3 MK2 Clone
Doesn't matter PLA