The RiskiX is our ultimate light weight 3″ racing frame.
The “toothpick” class is a new class in FPV racing and most of the frames are based on whoop style AIO flight controllers and ESCs. The TPU pod on those frames (including the StickiX TPU canopy) are lightweight but definitely lack of protection for the electronics inside. Over time, mechanical impact will result in defective components.
With this in mind, we designed the RiskiX as the ultimate racing frame. The carbon pod offers a lot more protection to the electronics but still is soft mounted to absorb some of the kinetic energy in crashes. Also the pod can be flipped open by removing only 2 screws for fast acess to the stack.
In contrast to many current “toothpick” style frames, the RiskiX features a 16×16 stack mounting pattern with the camera mounted in the front. This allows for a slim aerodynamic profile and a similar look to 5″ racing frames. In addition, flight controller and ESC can be replaced individually in case something breaks.
The stretchX geometry performs incredibly stable and the overall flight characteristics are very similar to 5″ frames.
135mm StretchX diagonal
16×16 stack compatibility
full camera protection
replaceable arms (c-type / boomerang)
3″ propeller size
weight: ca 20g with all 3D printed components
3mm full 3K arm thickness
protective CFK pod (the pod is very stiff and will not bend (thus will protect damage all the electronics inside much better than TPU only))
foldable carbon pod
quick swap LiPo system
capacitor mount in the back
TBS XF race antenna mount
1x bottom plate
1x mid plate
2x pod plate
2x quick swap LiPo system (3S and 4S)
Flight Succex V2.1 ESC + FC (12A)
AMAX 1303 4600 2-4S Motor
Gemfan 3018 Propellers
Runcam Racer Nano 1.8mm
TBS UNIFY nano PRO32
TBS XF nano receiver
TBS XF race antenna
3S 450mAh or 4s 450mAh
TBS Crossfire TX Lite