OpenRC 1:10 RC Truggy Rims

by barspin Dec 30, 2012
Download All Files

Thing Apps Enabled

Please Login to Comment

Are there any slick tires that would fit this wheel?

What size hex is that will it fit a traxxas tmaxx 5 side hex

what is the size of the hex within the hub?

Are these standard 2.2" wheels ?

PRO-LINE 30 Series Interco TSL SX Super Swamper 2.8 Tire Black RC Cars #10110-00

What are the recommended print settings for this? Infill %? I tried printing in ABS at 10% infill (rectilinear), but a crack appeared across the center soon after removing the support. Cool print though.

Great rims, I have them printed out. Any ideas on other tires than the Losi 320S zombie max? They are no longer available

Wring its hands but I am not good in english :) , i mean option in my software Cura "Infill Overlap" what % will be the best?

Salut, quel taux de remplissage faut-il pour l'impression ?

Hello, my French is not the best, do you mean infill rate?

Can someone tell me how much material is used for this? Or how much does this rim weight?

Hi love you rims . I want to know if it's possible to get it for a 1:8 rc car
With a diameter of 82mm and 43mm for the width?
Or if you have a customisable version?
I really want to get these rims on my rc car.
Thank's a lot I hope you can help me.

It takes me almost 6 printing in nylon. Have my Printer tuned pretty well though.

Is this rim a 2 piece design? Just printed 2 of them, face up with support and during support removal, the rim split in two halves...

Hey, great thing.

What settings are you using to print this? I've done some slicing and at 80 mm/s and .2 layer height it takes up to 9h printing each wheel. Is that around your print time?

That sounds about right. 0.2mm layer height and 8-9 hours of print time.

Printed 4 of these for my truck, works like a champ. Printed in deep blue and acetone bathed. Looks GREAT

Sounds awesome! Would you mind posting some pictures?

Sure, I uploaded a picture of them on the SCT and one of before/after picture of acetone bathing. Any plans for more rims? I love them!

Printed a pair of these and mounted them on the rear axles of my Traxxas Rustler. The fit is very good, the nut has to be tightened down to get them perfectly in place. Buying some acetone to get tires off some old rims and will try gluing rubber to these soon.

I have printed one of these. I have a question. Why is there a gap in the rim. I like the "sloped" ridge Idea but leaving the ridge open like that is inherently weak. I would like to see a version where the ridge is square and solid. Thanks.

I'm guessing this was printed with the inner portion of the rim facing downwards, and with support?

Sure did. If you want i can post a STL including support.