This is MK3D!
The case has a very open interior at requires a good ammount of cable management to keep clean but the reward is massive.
Restrictions and limits,
CPU delid prefered to keep the CPU at a nice temp.
CPU cooler max height: 47mm
GPU max length: 177mm
SFX PSU's only
Other than the printed parts you'll need the following:
2pcs Silverstone SST-FM182 or equivalent
1pcs Li-Heat PCI-E Gen 3.0 Ribbon flexible Riser Cable 100mm or equivalent
22pcs m3 bolts ( 8pcs 11mm and 14pcs 7mm )
22pcs m3 square nut ( 2mm thick )
8pcs m5 bolts ( 10mm long )
2pcs 186x235x3mm acrylic for the left and right side panel ( dxf included in the download )
1pcs 179x235x3mm acrylic for the front panel ( dxf included in the download )
1pcs vandal switch ( 16mm )
I hope you'll enjoy this pc case and perhaps tweak and modify to your need. If you print it as is or modify it i would love to take a look at it so post a picture and tag me in, im forsbergcustoms on all platforms.
Esun PLA+ PLA