Phone Cradle Converter
by theroar, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I have a vertical cradle that I need to be able to lay down so it fits in the armrest on my couch.
Printed it at 5%, no support. The screw holes on the cradle made a sweet area for me to create pegs to lock it together. Building the elevated area without support seemed like a likely fail, but I am quite the plastic miser. =) There were a few strings of mislaid plastic, but I could not have been happier.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Phone Cradle Converter by theroar is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving theroar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure theroar would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).