Pivoting LCD frame for 20 mm extrusion

by cfeniak Jul 20, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Files are missing the pivoting guide.

All the parts are in the original files (versus Elmo's mod). There should be three.

Sorry... can't find it. There are 2 STL files. LCD_Frame.stl and LCD_Frame_Elmo_Mod.stl. The LCD_Frame.stl is the mount for back of LCD case which the pic shows 2 parts... the LCD back mount and the pivoting guide... but when you open the stl... the pivoting guide is not there... only the back mount... there are a bunch of lines that looks like garbage (or corrupt file?). The Elmo file is a 1 piece main frame.

I just opened the LCD_Frame file in slic3r and there are three parts, manifold, no errors. No sure what is going on for you. I'll upload it separately for ya though! Done.

Thanks so much!! Ya.. the LCD_Frame.stl only shows 1 part with a bunch of lines to one side. Not sure why. I'm using my Afinia (same as UP!) for parts to build a larger 3D Printer. Thanks again!!

Quick questions... I got all of the parts printed and just assembled it. How are you able to hold the M3 bolt head end? I thought the user just turn the nut side (with a wing nut or the printed nut holder you linked to) but without holding the bolt head end... it'll just free spin.

I have nothing and it doesn't spin. I might be lucky or the friction with the plastic has more resistance than the torque applied to the nut.

Comments deleted.