This is my first parametric design in openSCAD. Please let me know if you encounter any issues.
This parametric M.2 PCB or 2.5" SSD to 3.5" Drive Bay Adapter can be customized to match your hardware. Simply click on Open in Customizer
Using the Customizer you may specify the dimensions of each slot or mix an M.2 slot with an SSD slot
supports 5mm to 11mm SSD drive height and 1.25mm or 2mm PCBs
Working on a sliding front lock plate - option "Lock_Plate" in the Customizer creates M3x10 mounting holes
You need to create a left and a right "Bracket Side" when you use the Customizer
The following M.2 PCB adapter will fit "QNINE M.2 SSD Adapter to 2.5" SATA 3". It is mounted without the case to provide better cooling. Most others should fit as long as they don't have electronic components too close to the edge. The STLs need 3mm on each side but you can change that in the Customizer, check "Slot Depth".
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.