This is a derivation of a print I saw on Instagram. It is made cylindrical to add much more storage space, without the amount of space taken up significantly increased. There are four versions
-low poly style version
-normal version with bearing bottom
-low poly style version with bearing bottom
I would recommend that you not print this at a low layer height if you are going to make any of the versions with bearings. In my experience that works best at layer heights below 0.2mm. When the bearings are passed, they rest the layer height can be raised. The bearing will not work well if the object is light. The object will either need to have lots of pens and memory in it, for the static friction with the table to exceed the rolling resistance of the bearing. If you do not want to add lots of plastic to it by printing lots of top, bottom, and outer layers, then the best option will be to print the non bearing version.
Please visit my website or any of my social media pages if you would like to see more of my work.