Nexus One Holder
by txoof, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A slightly more robust and stable holder as part of my android car media project.
I made the small cutout for the lens slightly larger to so the phone can be inserted either with the track ball to the left or the right and added some feet so I can secure it to a tray in our car.
Print out a left and a right, trim ears, clean up edges and slide onto Nexus One. Or, print two Lefts and two rights. it should work just fine with two of the same.
I suggest pr inting with SF50 with the following options for good adhesion:
Skirt > Gap 4.0
Skirt > Layers > 25
Speed > Object First Layer
Feed Rate Infill 0.4
Feed Rate Perimeter 0.4
Flow Rate Infill 0.2
Flow Rate Perimeter 0.4
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Nexus One Holder by txoof is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving txoof a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure txoof would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).