TAZ 4 1.75mm Extruder Mount

by adafruit Jul 22, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Heres the link to the pdf guide that is still up if anyone is looking


If you're printing this, don't add any supports. They're built into the design. Adding more is counter productive; the supported supports are pretty much permanent!

Hi- the linked Adafruit Learn page seems to have gone missing- can that content be bought back please?

Very cool.

I'm getting a Kit Taz and am thinking it makes sense to get your second fan and improved extruder mount printed elsewhere first- rather than putting the Kit together... and then pulling it apart.

So three questions:


I'll post pictures later but for those not retrofitting their TAZ you may need to print a different set of gears. The ones I had on my previous wades extruder work but are a tad small. Printing these now: http://devel.lulzbot.com/TAZ/3.1/production_parts/OpenSCAD/Herringbone_gears_hi-res.scad ( use openscad to render to .stl files )