by onebitpixel, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
using these for a 3D rebuild of Incursion can be used for any other miniature game
wooden crates; w/lids
larger crate contains an internal lip to insert the sideboard shelf if needed
smaller crate requires you to glue (I use acetone) the two blocks to the underside of the crate; lining them up with the two connecting boards along the one side; creates a lift for the crate w/o the need to print with supports
I've updated the 34x55 file; I did not get any errors from this file while printing with the Rep2x or the Afninia printer but I did notice after importing it into Netfab some issues showed up during the analysis which my 3D printing software seemed to either ignore and/or fix.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Crates by onebitpixel is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving onebitpixel a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure onebitpixel would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).