Parametric Servo Bracket
by cokezero, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
derived from this... http://www.thingiverse.com/thing:13850
which was derived from http://www.thingiverse.com/thing:9915
existing parametric variables
servo width - servo_width
added and/or fixed parametric variables for;
servo length - servo_length base width - base_width : the width of the base plate of the bracket base length - base_length : the length of the base plate of the bracket base thickness - base_thickness : the thickness of the base plate of the bracket hole distance - hole_distance : distance between servo mounting hole hole diameter - hole_diameter : servo mounting holes sizes
improved the math for positioning the mounting holes; made the holes a fixed distance from outside edge of the base plate rather than the center.
made the servo_width variable an argument to the 'arm' module
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Parametric Servo Bracket by cokezero is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cokezero a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cokezero would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).