Mounting system for Knog Blinder Bicycle light
by spacetimeripples, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Has the silicon strap on your Knog Blinder failed yet? If so, I designed a case which holds the Knog Blinder to your handlebars without relying on their flawed silicon strapping system. Only thing needed is to purchase some Garmin Rubber rings here if you don't already have some:
Otherwise print and continue using your awesome Knog Blinder.
Part is meant to be printed without any support material. I added a tiny bit of support on both sides of the part where the groove for the rubber ring is located. Remove it with a hoppy knife and you're good to go.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Mounting system for Knog Blinder Bicycle light by spacetimeripples is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving spacetimeripples a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure spacetimeripples would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).