3D print your favourite electric truck for less then your pre-payment of the real thing you will have to wait for quite some time. All parts are printed without support. Wheels are spinning if you use the right parts, which are listed below. Tyres are printed from TPU, all other parts PLA or any other material of your choice.
Overall length (if you don't scale the model): 196 mm / 7,7"
8x brass insert M3 ruthex
4x M3x6 (chassis and body)
4x M3x14 (wheels)
4x polyamide washer (wheels)
superglue (for windows)
loctite (wheel screws)
This is a remix from Greg Bejtlich's 3D model on grabcad.com
Jan., 12th, 2020: updated "black_chassis_front.stl" with more clearance for AT tyres
Jan., 19th, 2020: updated "black_chassis_rear.stl" and "silver_body_rear.stl" to fix the imperfection where the wall thickness on the old body part at one spot near the rear wheel well was so small that there would be a hole after printing. The hole can be seen on some of the pictures. Your model will not have that if you download the new files.
any PLA / TPU
silver / matte black