Improved Spool mount part
by mrdummy, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is for spool mount.
You need this part to avoid filament bend problems when printing at high Z heights.
I have used the parts from http://www.thingiverse.com/thing:30742, but there is problem with my improved Prusa Mendel with new frame vertex. Because i can print at higher Z height, the spool holder part blocks the filament at x-min and x-max side.
Thus i designed a new part to keep the problems low. The filament bend now much less and there should no serious problems when printing at high Z height.
The part is thick enough to hold the heavy filament spools.
Designed and build with Google Sketchup.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Improved Spool mount part by mrdummy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving mrdummy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mrdummy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).