20mm lens holder for FLIR E4
by TickTock, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Holds a 20mm ZnSe, GaAs, or Germanium lens on a FLIR device to allow close focusing (macro mode). 50mm FL works well.
No support material required but a touching skirt or brim is recommended to help keep the tips in place on the first layer. Lens is held in with friciton.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
20mm lens holder for FLIR E4 by TickTock is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TickTock a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TickTock would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).