Completely 3D printed slim bank card wallet with cards’ ejection feature.
Printer: Prusa i3 mk3
Filaments: Prusament PLA black & orange
Resolution: 150um for all parts.
Printing time: ~8hrs
- Frame: 30-50% infill, Supports from the bed,
- Everything else 100% infill, Supports everywhere.
Side latches are glued on the frame (inside), to hold the cards in place.
Black & Orange
Walllet's Frame can be printed with Cards's opening faced the head. Supports from the bed only.
Side latches and ejector should be placed on the side (90°). Support everywhere.
The latches shall be glued on both sides on the placed where they are touching the Frame.
The Ejector shall be pushed in place with a force. Use pliers or similar tool to slightly band the Frame.