Loading
ItsRayK

Fitbit Versa 1 Charging Stand

by ItsRayK Jan 4, 2020
Download All Files

Thing Apps Enabled

Please Login to Comment

Comments deleted.

Does this work with the Versa 2 charger?

Short answer is, it might... I don't have a Versa 2, but I know the chargers are slightly different. If you want, you could just print the top part and do a test fit. If you do, please let me know and I'll add it to the description.

The cable runs straight through the backside of the charger. Looks like I have some design time in front of me. Thanks for the response

If you design it, I will print it! We have a Versa Lite and I think that has the same charger as the Versa 2, cord straight out the bottom.

I have designed a 1st draft charger cradle for the versa 2, but it’s still a bit loose, off by about a half millimeter. When I get to a draft that holds the charger without “extra help” I’ll post it here. But it might be a while as I’m not the watch owner, so print-test cycle is slow

Just an FYI: I was working on this for the Versa 2 charger if it helps. But I do not own a Versa 2, so like you, print-test cycle is slow. If you want to help me out try printing the top and letting me know how close it is.

https://www.thingiverse.com/thing:4090702

Fitbit Versa 2 Charging Stand
by ItsRayK

I will print it! Should I just do the top part, is that the only piece that’s been modified?

Because I don't own a Versa 2 or Lite, I made it based on images and would prefer you just print the top part and test it. If it fits correctly, then go ahead and print the bottom and let me know. Also let me know if it doesn't work and what I can do to fix it. Images of your print and charger will be very useful. Also continue this conversation on the other thing page.

Comments deleted.