This PCB holder requires an M3 x 8mm screw and an M3 nut if you need additional hight just add an M3 standoff to reach the desired position, also you will need to add two M3 nuts to the top of the standoff to keep the tip under 1.6mm.
If your Stencil Printer has no holes on the bed to attach the PCB holder you may need to use tape to secure it.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.