Kit to convert a folding fishing net like this one
Into a brass catcher that can be clamp onto a table or upside down onto the roof or structure of the stand.
You need one piece of each parts, except "bras" and "contre_pince" that needs two pieces.
Designed for a net with a 22mm handle and 13mm net arms.
The clamp is modified with a threaded rod in place of the center axle.
You will need a couple screws, washers and bolts to assemble it.
Those are metrics 3x12 wood screws, M4x20 with washers and nylstop bolts and M6 threaded rod with washers and nylstop bolt.
Printed in PETG to have more strength.
Enotepad PETG PETG