by MkMan, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I created this part to help with the calibration of the Skeinforge Carve setting for my Cupcake CNC. It is a set of two single-walled, open, stair steps 10 and 20 mm tall and 20x20 mm length and width. By serendipity, the inside wall pulls away from the outside wall as the carve setting gets too high, allowing me to precisely set my Carve to 0.39
WARNING: Your mileage may vary!
Note: the .SDLPRT is in Solidworks 2010 format.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Calibration Steps by MkMan is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MkMan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MkMan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).