Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Beer Bottle Cap Shooter in a classic Glock 17 Design

by Logan3000 Jan 16, 2020
Download All Files

Thing Apps Enabled

Please Login to Comment

Could you release a step file of the model, as others the hole is slightly to small for our caps

Beim ersten Test gefailt thx bro ;)

Was ist kaputt gegangen? Welches Filament wurde benutzt? PLA ist zu spröde. Ich hab das Design an einigen Stellen etwas verstärkt. Würde trotzdem für den Schlitten und das Gehäuse zu Nylon oder min. PETG raten.

Austrian caps a slightly to big for this

Can you meassure diameter and height? Maybe I can adjust the model

Its about 29/6,5 mm

But i can measure exactly with a caliper

Should fit now

Thx a lot, i will try

Comments deleted.

Nice design! Can you show us how you attached the schlitten (rubber band?) thx

added instructions to the summary.

yes please show how to mount the rubber band

added instructions to the summary.

What printing quality, infill, etc. did you choose? Printed in pla and unfortunately it's to weak for opening a bottle and the "schlitten" ist breaking every 2nd or 3rd shoot.

Try to change the print orientation of the schlitten or use a weaker rubber.

I printed the body in carbon fibre reinforced PET with 3.2 mm walls and 50 percent infill. The Schlitten I printed in Nylon.

What size screws did you use?

7 pcs. M4x25
1 pc. M3x10
both Hexagon socket head cap screws (DIN 912)

II believe it is my responsibility to point out the following to you and to urge you to add an express warning to your make!

In many countries such as the Netherlands, it is strictly forbidden to have toys that look like a real weapon. Very high penalties apply for this!

Quite apart from the fact that it is far from being amusing, waving around with a real-looking weapon.

Sorry you don't like it. I will add a warming.