Step 1: Print both parts and the Arduino Uno case (if the normal case doesn't print properly on your printer, try the 0.3mm or 0.4mm gap version)
Step 2: Attach the lever to the servo
Step 3: Mount the servo on the case
Step 4: Assemble the switch
Step 5: Wire your Useless Machine:
Step 6: Upload the example programm or your own to the Arduino
Step 7: Nothing, you're done! Please upload a photo ;)
Connect the black/brown servo wire to the ground of your Arduino
Connect the red servo wire to the 5V pin of your Arduino
Connect the white/yellow servo wire to pin 9
Connect one side of the switch to pin 10
Connect the other side of the switch to the ground
(switch should be open when it's pointing in the direction of the flap)
More from Interactive Art
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving SjFleischmann a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.