28BYJ-48 Mounting Bracket
by jbeale, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Right-angle mounting bracket for 28BYJ-48 (small 5V geared stepper) using M3 hardware. Version 1 has a smaller hole for the shaft, and is simpler to print, without countersunk holes for the M3 screws holding the motor. Version 2 has more shaft clearance for a particular timing belt pulley I'm using, and also makes the front surface flush. I think V2 is better, if your printer can manage the overhang caused by the countersunk holes for the M3 screws. Version 3 adds a side flange for more mounting options. V4 adds a front flange to resist down-tip when pulley belt exits below.
The SCAD files are provided so you can adjust to suit.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
28BYJ-48 Mounting Bracket by jbeale is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jbeale a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jbeale would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).