Loading
alpinedrones

smaller 57mm hubsan x4 replacement frame (h107)

by alpinedrones Aug 20, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, nice design, I just printed one and it flies really well. However, I was just wondering how you managed to get those nice photos in your description. Because they look sort of like you printed them then took photos of them against a white wash but the quality is just too high. Thank you :)

glad you like it. the pictures are CGI ;)

I'm not sure if there is something wrong with my motors or my print. I took them out of my h107 and pushed and pushed, but the holes are just too small. Printed great though.

it's clearly a tight fit. first of all be sure that you've chosen the correct file. a23 is for the larger motors which can be found on the h107c or d (camera and fpv version). you also might have to use a large flathead screwdriver to spread the motor mounts a little bit while inserting the motors. the mounts were wider on an earlier version, but motors used to drop out in crashes. I hope you can get it sorted out and enjoy the frame!

It is just the normal h107. I tried to pry it open with no luck. I'll just have to try again.

is there a prop guard to fit this?

unfortunately not yet, but it wouldn't be that hard to design one.

This is really an 80 MM quadcopter frame, as the frame size is determined by the distance (center to center) between opposing motors, not the distance (center to center) of adjacent motors... A battery holder for this quad can be found at... https://www.shapeways.com/product/WMFDTJKHN/?optionId=40666225&li=ostatus