Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Groovemount for PG35L extruder for Kossel
by SystemsGuy, published
Liked ByView All
Give a Shout Out
Printable groovemount plate for Johann's PG35L micro-extruder. My wooden groovemount was "in use", and I wanted to be able to try out Johann's design.
Rather than modify his extruder, I simply made a groovemount plate with integrated standoffs.
Print, insert hot-end, and enjoy! You'll want to print this in ABS, particulararly if you are using a j-head.
This will only work with Johann's PG35L remix, as the extruder is offset in the body.
EDITED : I managed to upload the wrong version! The old verson had the j-head mount properly offset, but the mounting holes where 2mm off. Thanks to New Perfection who noticed this!!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Groovemount for PG35L extruder for Kossel by SystemsGuy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving SystemsGuy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SystemsGuy would love to see what you've printed. Please document your print and share a Make with the community.